Front Load Part Washers

CUDA FRONT LOAD WASHERS

The popular front-load Cuda Parts Washers come with
removable debris screen, automatic low-water shutoff,
disc oil skimmer,convenient access to the sump
and easy-to-reach controls for the oil skimmer,
wash-cycle timers and turntable on/off switch.

Top Load Part Washers

CUDA TOP LOAD WASHERS

Design and technology are at their best with the Cuda
top-load automatic parts washers. All Top-Loads
feature rotating turntable,automatic low-water s
hutoff protection, disc oil skimmer, caster wheels,
 steam venting, easy-lift lid with debris screens.

 

 

CUDA PARTS WASHER MODELS

Click Pictures For Model Information

CUDA SJ-15 Parts Washer
SJ16
CUDA 2216 Parts Washer
2216
CUDA 2412 Parts Washer
2412
CUDA 2518 Parts Washer
2518

CUDA 2530 Parts Washer
2530 CUDA
CUDA 2840 Parts Washer
2840 CUDA
CUDA 2848 Parts Washer
2848 CUDA
CUDA 4860 Parts Washer
4860 CUDA

 

Far superior than washing by hand

Cuda automatic parts washers are aqueous based, industrial size washers that use pressurized jets of hot water and specialized detergents to deliver cleaning power that is far more cost-effective than washing parts by hand. Simply load parts, turn on the washer and walk away for 15 to 20 minutes while parts are automatically cleaned thoroughly and efficiently.

Cuda automatic parts washers provide a safe and efficient solution to cleaning parts because they eliminate the need for abusive cleaning solvents. Cuda parts washers use aqueous based cleaning detergents to optimally clean parts in an environmentally-safe process. Plus, they provide businesses with a time-saving solution. Your staff can simultaneously clean parts while performing other tasks.

 

Industries Served

 
  • Automotive

    Cuda Provides Easy Parts Cleaning for Automotive Repair

    Conservative estimates show that washing parts by hand costs service departments an average of $6000 a year, per technician! There is a better solution. With Cuda automatic parts washers, technicians can automatically clean anything from the largest engine block to the tiniest bit of hardware, in minutes, with NO hand labor! Powerful spray jets blast a solution of hot water and biodegradable detergent from the top, bottom and sides, to thoroughly clean the dirtiest parts — freeing the technician to perform other profitable tasks.

    Cuda manufactures over 100 models of top-load and front-load parts washers with load capacities ranging from 250 lbs. to 5,000 lbs. Ask about the model that would best fit your needs.

    Cuda Automatic Parts Washers are ideal for cleaning the following:

    • Transmissions 
    • Drivetrain Components
    • Fuel Injectors
    • Hydraulic Cylinders
    • Compressors
    • Exhaust Systems
    • Chassis Parts
    • Engine Blocks & Heads
    • Air Compressor Housings
    • Brake Master Cylinders
    • Fuel Injector Valves and Nozzles
    • Turbochargers
    • Wheels and Wheel Bearings
    • Axles
    • A/C Components
  • Manufacturing

    Cuda Provides Easy Parts Cleaning for Manufacturers

    Cuda automatic parts washers enable manufacturers to speed the cleaning process, whether it’s on an assembly line or a highly segmented industry. If you have parts that need cleaning, Cuda can help! Powerful spray jets blast a solution of hot water and biodegradable detergent from the top, bottom and sides, to thoroughly clean the dirtiest parts — freeing workers to perform other profitable tasks. Time is money in manufacturing, and to meet the order demand, you need equipment you can count on.

    Cuda manufactures over 40 models of top-load, front-load, conveyor and manual parts washers with load capacities ranging from 250 lbs. to 5,000 lbs.Ask about the model that would best fit your needs.

    Cuda Automatic Parts Washers are perfect for stamping, machining, cutting, heat treating, coating/phosphatizing and painting processes on items like the following:

    • Computer Frames and Housings
    • Battery Casings
    • Compressor Parts
    • Metal Furnishings
    • Surgical Implant
    • Aluminum Castings
    • Transformers
    • Printing Rollers
    • Fittings
    • Tooling
    • Large Tote Bins
    • Moulds
  • Small Engine Repair

    Cuda Provides Easy Parts Cleaning for Small Engine Repair

    Cuda automatic parts washers enable small repair shops to speed the cleaning process, whether you are cleaning carburetors for a go-cart or bed knives and blade reels for lawn mowers. If you have parts that need cleaning, Cuda can help! Powerful spray jets blast a solution of hot water and biodegradable detergent from the top, bottom and sides, to thoroughly clean the dirtiest parts — freeing you and your workers to perform other, more profitable tasks. Time is money, so if you are spending a lot of time washing parts by hand, you should consider a Cuda automatic parts washer

    Cuda manufactures top-load and front-load parts washers with load capacities ranging from 250 lbs. to 5,000 lbs. Contact us today and we will help determine the model that would best fit your needs…and your budget.

    Cuda Automatic Parts Washers are perfect for small engine repair shops working on motorcycles, go-carts, mopeds, motor scooters, dirt bikes, snowmobiles and jet skis.

    Cuda Automatic Parts Washers are ideally suited for cleaning small engine parts. For example:

    • Belts
    • Transmissions
    • Pulleys
    • Bed Knives and Blade Reels
    • Pumps
    • Blades
    • Drive Chains
    • Wheels & Wheel Bearings
    • Carburetors
    • Brakes
  • Aerospace

    Cuda Provides Easy Parts Cleaning for the Aerospace Industry

    Cuda Automatic Parts Washers use pressurized hot water and industrial detergents to clean parts automatically.

    Whether it’s jet engine repair or manufacturing, Cuda Automatic Parts Washers are ideal for cleaning oils, grease and other contaminates. Technicians can automatically clean anything from turbine blades to the tiniest bit of hardware, in minutes, with NO hand labor! If you have parts that need cleaning, Cuda can help! Powerful spray jets blast a solution of hot water and biodegradable detergent from the top, bottom and sides, to thoroughly clean the dirtiest parts – freeing workers to perform other profitable tasks. Special options are available to speed cleaning, as well as height extensions for oversized parts.

    Cuda manufactures over 40 models of top load and front load parts wahers. Contact us today for more information.

    Cuda Automatic Parts Washers are ideal for cleaning and maintaining:

    • Jet Engine Assemblies
    • Rotors
    • Stators
    • Fan Blades
    • HPT Blades
    • Casings
    • Landing Gears
    • Wheels
    • Thrust Reversers
    • Hydraulics
    • Vanes
    • Brake Assemblies
  • Printing

    Cuda Provides Easy Parts Cleaning for the Printing Industry

    Printers and pressmen know that ink, paper fibers, varnish and lubricants leave a mess and are difficult to clean. Cleaning by hand is not cost efficient, and you can’t afford press down time. Turn to Cuda Automatic Parts Washers and biodegradable detergents, the safe, no-solvent solution to cleaning press parts–automatically. Powerful spray jets blast a solution of hot water and biodegradable detergent from the top, bottom and sides, to thoroughly clean the dirtiest parts – freeing your mechanics and pressmen. Motors, blades and buckets clean up in no time, allowing you to get the press back up and earning revenue. Quick and easy to operate, choose the model with a proper size turntable to fit your needs.

    Cuda manufactures over 40 models of top-load and front-load parts washers with load capacities ranging from 250 lbs. to 5,000 lbs.

    Cuda Automatic Parts Washers are ideally suited for the rugged demands of everyday press parts cleaning and maintenance

    • Sheet-Fed or Web Offset Presses
    • Ink Pumps
    • Spray Bars
    • Slicers
    • Cam Followers
    • Lever Arms
    • Chains
    • Bearing Housings
    • Brackets
    • Roller Washers
    • Gears
  • Chainsaw Repair

    Cuda Provides Easy Parts Cleaning for the Printing Industry

    Cuda aqueous parts washers enable chainsaw repair shops to speed the cleaning process, whether you’re cleaning chains, carburetors, guide bars, bearings or blower fans. When you need clean parts, you can count on Cuda to have the right automatic parts washer for you.

    Powerful spray jets blast a solution of hot water and biodegradable detergent from the top, bottom and sides to thoroughly clean the dirtiest parts so you and your workers are free to perform other, more profitable tasks. Time is money, so if you’re spending a lot of time scrubbing parts by hand, Cuda has a better way.

    There are more than 20 models of Cuda top-load and front-load parts washers with load capacities ranging from 250 to 5,000 lbs. Contact us today and let us help you discover a faster, safer, more efficient way to clean…all within an affordable price.

    Cuda Automatic Parts Washers are ideally suited for cleaning the following:

    • Cylinder Heads
    • Blower Fans
    • Carburetors
    • Bearings
    • Guide Bars
    • Tools
    • Engine Blocks
    • Gear Housings
    • Nuts and Bolts
    • Pistons
    • Saw Chains
    • Pulleys