The Cuda top load line-up, the SJ-15 uses a patented spray wash technology which
eliminates the need for a drive motor, gears and pulleys. Using a water-propelled spray
arm with 23 nozzles that spin around a stationary parts basket, parts are hit from every
angle while being cleaned. The Cuda SJ-15 Series parts has a 350-lb. load capacity,
and a basket dimension of 32” x 21”. 90 gallon sump capacity, 3 HP pump motor
delivering 37 GPM @ 30 PSI.

Image result for PDF BUTTON

Click Here To Request Quotation
 

  • Cabinet

    Cabinet and lid shall be constructed of 12 gauge steel, finished with a powder coat paint for long life and easy cleaning. Parts basket to be constructed of 12 gauge steel and can easily be removed from cabinet. Steel chip tray located below parts basket to prevent small parts from falling into the tank. Lid will have interlocking mechanical seal, with safety shut-off and lid lock mechanism. Lid shall have gas struts for minimal effort in opening and closing lid. Machine will have automatic oil skimmer to remove excess oils from sump tank, thus lengthening the effectiveness of wash solution. Machine will have accommodations to allow for the following options:

    • Automatic Water Fill
    • Service Tray
    • Temperature Gauge
    • Detail Brush with Pump
    • Power Brush (Pneumatic)
    • Hour Meter
    • Caster Wheels
    • Pressure Gauge

  • Rotating Spray Arm

    Rotating spray arm must be water driven. Rotation of arm will provide complete spray coverage of parts being washed. Twenty-three (23) spray nozzles will belocated on the rotating spray arm providing over lapping coverage of parts being washed.

  • Controls

    Electrical control panel shall have 7 day programmable heater timer, 60 minute wash timer, power indicating light and low water shutdown indicator lights. Machine will include a sealed safety stop switch. An adjustable thermostat will control water temperature. A safety control switch will not allow pump or heater to operate if water level drops below a prescribed set point.

  • Pump

    Pump will be centrifugal 3 hp vertical sealless, with 50 GPM (189 lpm) output at 45 PSI (3.10 bar) capable of handling 175°F (79°C) water with cleaning detergents. Pump motor must have safety overload protection.

  • Heater

    Machine to have a 6000 Watt, 208V, 230V, 460V, 575V, screw plug immersion heating element. Heating element is to be constructed with an incoloy sheath for maximum corrosion and oxidation protection.

  • Dimensions

    • Overall dimensions 49″H x 53″W x 48″D
    • (125 x 135 x 122 cm)
    • Basket dimensions 32″L x 21″W x 7″H (81 x 53 x 17 cm)
    • Working height 18″ (45 cm)
    • Work load 350 lbs. (159 kg)
    • Ship weight 950 lbs. (Dry Weight) (430 kg)
    • Water tank capacity 90 gallons (341 L)

  • Options

    • Automatic Water Fill
    • Castor Wheels
    • Small Parts Basket
    • Tool Basket with Cleaning Tools
    • Temperature Gauge
    • Oil Drain Container
    • Oil Skimmer Timer, 24 Hour
    • Detail Brush with Pump
    • Power Brush (Pneumatic)
    • Hour Meter
    • Pressure Gauge
    • Panel Mounted Heater Timer, 7 Day
    • Service Tray


 

CUDA PARTS WASHER MODELS

Click Pictures For Model Information

 

CUDA SJ-15 PARTS WASHER
SJ16
CUDA 2216 PARTS WASHER
2216
CUDA 2412 PARTS WASHER
2412
CUDA 2518 PARTS WASHER
2518

CUDA 2530 PARTS WASHER
2530 CUDA
CUDA 2840 PARTS WASHER
2840 CUDA
CUDA 2848 PARTS WASHER
2848 CUDA
CUDA 4860 PARTS WASHER
4860 CUDA