2530 CUDA

The Cuda 2530 is the smallest in the front-load automatic parts washer models.
The 2530 features a turntable diameter of 25-inches, working height of 30-inches,
and load capacity of 500 lbs. The 2530 Series is equipped with a 3 HP vertical
seal-less pump producing 50 GPM at 45 PSI.

Image result for PDF BUTTON

Click Here To Request Quotation
 
  • Cabinet

    Cabinet: 14 ga., Tank 12 ga., Lid: 14 ga., steel, finished with a powder coat paint finish for long life and easy cleaning. Turntable to be constructed of 7 ga. steel with sealed ball bearings. Pull out debris screen located below parts basket to prevent small parts from falling into the tank. Door will have a safety shut-off and door latch mechanism. All welded seams must meet ASME Standards. Machine will have accommodations to allow for the following options:
    – Automatic Water Fill
    – Filtration System
    – 7 Day Heater Timer
    – 7 Day Oil Skimmer Timer
    – Detail Brush with Side Sink
    – Power Brush
    – Two Tier Turntable
    – Small Parts Basket
    – Containment Ring
    – Parts Tree
    – Oil Drain Container

  • Rotating Turntable

    Rotating turntable must be gear-motor and chain driven. Rotation of turntable will provide complete spray coverage of parts being washed. Twelve (12) spray nozzles will be located on the spray manifold providing overlapping coverage of parts being washed.

  • Oil Skimmer

    An oil skimmer will be provided that removes floating oils from the surface of the sump tank cleaning solution. The skimmer will be constructed with a fan cooled electric motor, stainless steel disk skimmer and dual stainless steel scraper blades.

  • Controls

    Electrical control panel shall have a 12 hour heater timer, 60 minute wash timer, 30 minute skimmer timer, turntable on-off switch and low water shutdown indicator light. Machine will include a manual door latch. An adjustable thermostat will control water temperature. A safety control switch will not allow pump or heater to operate if water level drops below a prescribed set point.

  • Pump

    Pump will be a centrifugal, 3 HP with 50 gpm (189 lpm) output at 50 psi (3.4 bar) capable of handling 190°F (88°C) water with cleaning detergents. Pump motor must have safety overload protection.

  • Heater

    Machine to have a 6 kW immersion heating element. Heating element is to be constructed with an incoloy sheath for maximum corrosion and oxidation protection.

  • Dimensions

    – Overall Dimensions 45″W x 74″H x 48″D (114 x 118 x 122 cm)
    – Turntable Diameter 25″ Diameter (63.5 cm)
    – Working Height 30″ (76.2 cm)
    – Work Load 500 Lbs (227 kg)
    – Ship Weight 779 Lbs (353 kg)
    – Water Tank Capacity 40 Gallons (151 liters)

  • Options

    – Automatic Water Fill
    – Filtration System
    – 7 Day Heater Timer
    – 7 Day Oil Skimmer Timer
    – Detail Brush with Side Sink
    – Power Brush
    – Two Tier Turntable
    – Small Parts Basket
    – Containment Ring
    – Parts Tree
    – Oil Drain Container


 

CUDA PARTS WASHER MODELS

Click Pictures For Model Information

 

CUDA SJ-15 PARTS WASHER
SJ16
CUDA 2216 PARTS WASHER
2216
CUDA 2412 PARTS WASHER
2412
CUDA 2518 PARTS WASHER
2518

CUDA 2530 PARTS WASHER
2530 CUDA
CUDA 2840 PARTS WASHER
2840 CUDA
CUDA 2848 PARTS WASHER
2848 CUDA
CUDA 4860 PARTS WASHER
4860 CUDA